Bixolon Printer Blank Labels (SLP-DX220x/DX223x)

Self-Test Procedure

1. Ensure the paper roll is properly installed.

2. Power on the printer while holding down the Feed button. Continue holding the button until the printer begins printing the self-test (see image below)

If the issue appears during the self-test, refer to the official Bixolon documentation for reset and calibration instructions:

• SLP Series Calibration Guide

  • Calibration instructions: Page 33

  • Reset instructions: Page 40

You can also reference PathSpot-created materials here.

ERROR CODE EXPLANATIONS: 

Refer to the chart below for explanations of the LED light sequences. For example:
LED1 Solid Red with LED2 Blinking Red indicates that the paper/media cover is not properly locked into place.